There are many ways to improve the sound coming from your car speaker system. Two car amplifiers may be bridged together which will be helpful in improving the sound. For driving the big speakers this kind of system can also give a very high power. Speakers like sub woofers can be given very high power using this. The amplifiers are to be connected correctly for the first time. A wrong hook up may also lead to burning of either amplifiers or your speakers or even both. But how to bridge two car audio amps?
The easiest way to improve and enhance the sound of speaker is to connect two car amplifiers together . This also gives lot of power for bigger speakers such as woofers. We may need few things before we start doing this job . They are wrenches, pliers, wire strippers, wire rated for the amplifiers and of course the two amplifiers which we are planning to bridge.
The first step to be done before performing the task is to thoroughly check the manuals of both the amplifiers given by the manufacturer. Only the amplifiers which has got same characteristics like power etc can be bridged. If amplifiers with different power rating are bridged it may lead to malfunction or even damage to the amplifiers. Thus one should ensure that both these amplifiers have same power rating. In case there is any doubt of performing the task or in determining the match among the two it is better to drop the idea of bridging them both.
Then the supply of power is cut from the two amplifiers. This is done by removing the cable from the positive end of the battery of the car with the help of pliers or wrench. It can remain in such a way till the amplifiers are completely bridged.
While buying an amplifier please do check for the presence of the bridge switch. In most amplifiers it is present at the back edge of the amplifier which can be easily spotted. If it is not in bridge mode set it back to that mode. In the next step inch insulation is stripped off from the wire at both ends.
The most important thing to be done is the connection of the wires. The positive terminal of one amplifier holds one end of the wire while the other end is held by the negative terminal of the other amplifier. This can be performed by wrapping them around its corresponding terminal and then screwing them down. There is a clear distinction between the positive and negative terminals which is given by its color difference where red indicates positive and black indicates negative terminal.
The other terminals that are free are connected to the speakers. The positive end of one of the two amplifiers is connected to positive end of the speaker. Similarly, the negative end of the amp is connected with the negative end of the speaker.
This article would have proved to be effective in guiding us on How to Bridge Two Car Audio Amps by instructing and explaining all steps with useful suggestions and tips.
Looking to find the best deal on Auto Hifi, then visit www.powernetshop.at to find the best advice on Car audio for you.
For information on Car Shipping visit MetroGistics.
Other Interesting Automotive Links